Home /
Vehicle Electronics

Vehicle Electronics

Get the most out of your emergency apparatus with firefighting vehicle electronics

Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance. Contact us for more information about our vehicle electronics offering.

610-00035 | PDM-4x12

The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network.
Learn More
- Add to Compare
610-00034 | PDM-8

The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network. The module has 8 outputs of which 4 of the outputs can be polarity selectable or configured as polarity selectable inputs.
Learn More
- Add to Compare
610-00030 | Switch Input Module

The ES-Key 18 digital, 3 output, with 1 analog input module is a Class 1 ES-Key network module designed for use in a ES-KeyTM electrical system network.
Learn More
- Add to Compare
119890 | SuperNode II

The ES-Key High Density I/O Node (Supernode II p/n 119890) consolidates functions of multiple ES-Key modules to reduce node count and simplify addressing. The Supernode II is well suited for applications where a centralized node location is required.
Learn More
- Add to Compare
120727 | High Density Power Distribution Module (HDPDM)

The HDPDM is a High Density Power Distribution Module for use in the ES-Key System. It features 21 outputs at up to 13 Amps each and 10 polarity selectable inputs. It is sealed to IP67 and can be mounted anywhere on the apparatus.
Learn More
- Add to Compare
122116 | USM II

The USM II features a full compliment of Utility function and can be configured as a drop in replacement for any USM 1 in the field. It features built in USB connectivity replacing the need for special programming adapters.
Learn More
- Add to Compare
105228 / 105662 / 105763 | Electrical System Manager

The Electrical System Manager is a precision device which monitors the electrical system and controls electrical loads.
Learn More
- Add to Compare
610-00015 | Total System Manager

The Total System Manager (TSM) is the most versatile electronic system manager available. This fully programmable device is designed to exceed NFPA requirements.
Learn More
- Add to Compare
111655 | SSD Airminder display

Breathing air warning system for aerials, aerial platforms, air trucks and C.F.R. vehicles. Keeps firefighters informed of the percentage of air remaining in a breathing air system from 100% capacity down to zero. A low warning flashes at 25% of maximum air bottle capacity and a 90 dB audible warning sounds at 20% of capacity. The audible alarm can be manually silenced but the visual warning will continue to flash until the air system is filled above the 25% level.
Learn More
- Add to Compare
111663 / 111665 / 111822 | SSD Flowminder display

The Class 1 digital flow meter allows operators to monitor actual flow from a discharge line. The compact design reduces pump panel space requirements while providing large, easy to read digits. Eliminates the need for "rules of thumb" or fire ground hydraulics.
Learn More
- Add to Compare