Need Assistance?

Foam & CAFs

Fighting fire with foam

Hale has a variety of foam equipment options and CAFs foam systems that use flow-based foam concentrate proportioning systems with digital controls, making them simple to use for anyone on your firefighting crew. Concentration of the foam is automatically adjusted according to your desired presets. You can count on foam systems from Hale for Class A and Class B fires.

Search our foam fire suppression system options below, or contact a Hale product expert for more information about our fire foam pump products.

  1. 130 | SmartCAFS

    SmartCAFS is a Compressed Air Foam System that works smarter for you. Using a Compressed Air Foam System has traditionally been a complex and daunting task with many sequentially specialized steps. Successfully balancing the water pump, foam system, and air system so they work effectively together can be downright frustrating. The days of intimidating CAFS are over.

    SmartCAFS executes all of these functions for your operator with a push of a single button and completely simplifies the CAFS procedure. The fully programmable presets allow your department to set CAFS configurations for numerous fire scenarios making it easier than ever to operate a Compressed Air Foam System through a fully integrated touch screen user interface.

    Learn More
  2. Autofill

    58 | Autofill

    The AutoFill is an automatically operating direct booster tank fill valve. It is a popular compressed air foam system accessory that makes water supply management easy. Available in 2-1/2-inch and 3-inch Hale stainless valve sizes, the AutoFill takes the burden off the pump operator in keeping the booster tank full. The AutoFill valve automatically opens when the booster tank level drops to , and then closes itself when the tank is topped off full, when fed with an adequate incoming water supply source. The AutoFill also has a "manual" feature that allows the pump operator to manually operate the valve should conditions require. The water supply inlet for the AutoFill can either be a 2-1/2-inch NST inlet at the pump panel or it can be fed water by a Hale Fill-Thief. With the UV SmartCAFS version the tank is preset to a determined level. The Fill-Thief bolts on the inlet of the Hale Master Intake Valve (MIV) and makes midship pump water supply management easy. The Fill-Thief is an accessory built specifically for users purchasing a midship pump and compressed air foam system combination. When large diameter supply hose (LDH) is connected to the Fill-Thief inlet and the MIV is in the "closed" position, the incoming water is directed to a direct booster tank fill valve. This direct booster tank fill can either be a "manual" valve arrangement or a Hale "AutoFill" automatic direct booster tank fill valve assembly. The benefit of the Fill-Thief is that only one LDH line need be connected to feed both the direct booster tank fill valve, and/or, when the MIV is opened, the midship fire pump. (The FillThief eliminates the need to have two supply lines -- one LDH hose to the fire pump inlet, and one 2-1/2-inch hose to the direct booster tank fill valve inlet -- connected to the apparatus). Note The Fill-Thief fitting extends beyond standard pump house enclosures. On typical installations, the pump panel enclosure is notched and the Fill-Thief fitting is exposed.
    Learn More

Back to top