Need Assistance?

Parts & Accessories

Page:
  1. 1
  2. 2
  3. 3
  1. Fire Service Gauges

    Fire Service Gauges | Fire Service Gauges

    Class1 is a leading manufacturer of gauges that exceed the rigorous demands of fire service professionals. Standard, Backlit, & Duplex gauges are available in a wide variety of sizes and pressure ranges.
    Learn More
  2. Gauge Test Plug (Single)

    102709 | Gauge Test Plug (Single)

    Gauge Test Plug is nickel plated brass with a 1/4” NPT front port and 1/8” NPT back port.
    Learn More
  3. Test Port Assembly

    121384 | Test Port Assembly

    Ease of installation and simplicity of design makes this test port assembly the best option for multiple tasks behind the panel. Each port has one front 1/4” NPT port, one back 1/4” NPT port, and two 1/4” DOT push-on fittings. The ports behind the panel are perfect for mounting pressure transducers for pressure governors. This assembly is made of brass with a chrome plated bezel.
    Learn More
  4. Automatic Drain

    34AD | Automatic Drain

    The Automatic Drain is normally open and closes at 6 PSI. It can be mounted in the discharge line true low spot under the truck. Great for deck guns and front or rear jump lines.
    Learn More
  5. Air Operated Drain

    110527 | Air Operated Drain

    3/4" Air operated drain valve.
    Learn More
  6. Ball Valve Drains

    34BV | Ball Valve Drains

    Class1 has ball type drain valves from ¼” to 1”
    Learn More
  7. Petcock Valve

    105120 | Petcock Valve

    Class1’s Petcock Valve is an all brass assembly with a tag recess area in the chrome plated zinc handle. The petcock valve has 1/4” ports and is great for engine coolers, pump coolers and air valves.
    Learn More
  8. Assembled High Pressure Flexible Pipe and Coupling

    120 | Assembled High Pressure Flexible Pipe and Coupling

    Class1 can quickly and easily build your custom pipe assemblies for new construction or replacements.
    Learn More
  9. High Pressure Couplings

    121 | High Pressure Couplings

    COUPLINGS — Full flow couplings are precision machined from high tensile strength stainless steel. All female couplings are brass. 3” and 1” male and grooved coupling® couplings are brass.

    FERRULE — High tensile strength stainless steel ferrule with serrations on the I.D. to assure maximum holding power.

    Learn More
  10. Valve Flanges

    125 | Valve Flanges

    Hale's Valve Flanges are made of stainless steel. They are available for 2”, 2-1/2”, 3” and 4” valves. Including suction, discharge, weld and grooved coupling end.
    Learn More

Page:
  1. 1
  2. 2
  3. 3

Back to top