Home /
Vehicle Electronics

Vehicle Electronics

Get the most out of your emergency apparatus with firefighting vehicle electronics

Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance. Contact us for more information about our vehicle electronics offering.

610-00029 | Climate Control Module

The ES-Key Climate Control Module (C1 p/n 610-00029) is an ES-Key node that controls a vehicle's air conditioning clutch, heating valve, and fan motor speed with high current digital outputs based upon received J1939 CAN commands from a supported ES-Key control device.
Learn More
- Add to Compare
610-00033 | Accelerometer-Inclinometer

The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
- Add to Compare
118093 | Seat Belt Warning

The Seat Belt Warning Module (SBW) monitors up to 10 seats and 10 seat belts. Each input is selectable for Normally Open (N.O.) or Normally Closed (N.C.) switch contacts. The SBW validates seat/seat-belt sequencing and has enhanced “seat bounce” error validation. It communicates via J1939 CAN messages to the VDR and displays.
Learn More
- Add to Compare
106877 | 4 Light Driver Module

The 4 light driver module provides 7.5 amps per output (x4) and mimics the function of the Master Tank Level Display. It is used to power the large tank indicator lights on the side of the apparatus. It is compatible with all Class1 ITL and ITL-40 tank gauges.
Learn More
- Add to Compare
111655 | SSD Airminder display

Breathing air warning system for aerials, aerial platforms, air trucks and C.F.R. vehicles. Keeps firefighters informed of the percentage of air remaining in a breathing air system from 100% capacity down to zero. A low warning flashes at 25% of maximum air bottle capacity and a 90 dB audible warning sounds at 20% of capacity. The audible alarm can be manually silenced but the visual warning will continue to flash until the air system is filled above the 25% level.
Learn More
- Add to Compare
111663 / 111665 / 111822 | SSD Flowminder display

The Class 1 digital flow meter allows operators to monitor actual flow from a discharge line. The compact design reduces pump panel space requirements while providing large, easy to read digits. Eliminates the need for "rules of thumb" or fire ground hydraulics.
Learn More
- Add to Compare
FMS / FMD | Flow Minder Super System

The combination of the Flow Minder display and digital pressure gauge allows the operator to constantly read both flow and pressure. The digital pressure gauge utilizes a Class 1 pressure transducer that eliminates the possibility of frozen gauge sensing lines.
Learn More
- Add to Compare
FVS25 / FVS35 | Flow Minder Value System

The Flow Minder "Value" system combines flow indication with our rugged liquid filled pressure gauge. This combination gives the familiar look of a pressure gauge while having the advantage of flow in gpm or liters. The Flow Minder "Value" System is available with color coded inserts for ease of identification.
Learn More
- Add to Compare
123340-0* | ITL-40

The ITL-40 Tank Level Gauge features a true 180 degree viewing angle with super bright LED's and built-in diagnostic "text" messages for easy troubleshooting. Available in red, yellow, green, blue and multicolored models. the ITL-40 has a programmable low current output for auto fill systems.
Learn More
- Add to Compare
119395 / 119396 | ITL-4

The Intelli-Tank™ displays feature wide angle viewing and ultra-bright LED’s for high visibility even in direct sunlight. It is very easy to calibrate.
Learn More
- Add to Compare