Vehicle Electronics
Get the most out of your emergency apparatus with firefighting vehicle electronics
Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance.
Contact us for more information about our vehicle electronics offering.
-
The ES-Key Climate Control Module (C1 p/n 610-00029) is an ES-Key node that controls a vehicle's air conditioning clutch, heating valve, and fan motor speed with high current digital outputs based upon received J1939 CAN commands from a supported ES-Key control device.
Learn More
-
The ES-Key High Density I/O Node (Supernode II p/n 119890) consolidates functions of multiple ES-Key modules to reduce node count and simplify addressing. The Supernode II is well suited for applications where a centralized node location is required.
Learn More
-
The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
-
The USM II features a full compliment of Utility function and can be configured as a drop in replacement for any USM 1 in the field. It features built in USB connectivity replacing the need for special programming adapters.
Learn More
-
The Seat Belt Warning Module (SBW) monitors up to 10 seats and 10 seat belts. Each input is selectable for Normally Open (N.O.) or Normally Closed (N.C.) switch contacts. The SBW validates seat/seat-belt sequencing and has enhanced “seat bounce” error validation. It communicates via J1939 CAN messages to the VDR and displays.
Learn More
-
The Electrical System Manager is a precision device which monitors the electrical system and controls electrical loads.
Learn More
-
The Total System Manager (TSM) is the most versatile electronic system manager available. This fully programmable device is designed to exceed NFPA requirements.
Learn More
-
The H-Bridge module is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network
Learn More
-
The ES-Key Climate Control Display provides status and control functions for an ES-Key Climate Control system (air conditioning and heat) utilizing a Climate Control Module (p/n 114942).
Learn More
-
The Analog Temperature Sensor is a compact, waterproof module that converts ambient temperature (-40°F [-40°C] to +257°F [+125°C]) to an analog voltage (+174mV to +1205mV) for use with various Class 1 ES-Key modules.
Learn More