Home /
Vehicle Electronics

Vehicle Electronics

Get the most out of your emergency apparatus with firefighting vehicle electronics

Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance. Contact us for more information about our vehicle electronics offering.

610-00029 | Climate Control Module

The ES-Key Climate Control Module (C1 p/n 610-00029) is an ES-Key node that controls a vehicle's air conditioning clutch, heating valve, and fan motor speed with high current digital outputs based upon received J1939 CAN commands from a supported ES-Key control device.
Learn More
- Add to Compare
610-00033 | Accelerometer-Inclinometer

The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
- Add to Compare
118093 | Seat Belt Warning

The Seat Belt Warning Module (SBW) monitors up to 10 seats and 10 seat belts. Each input is selectable for Normally Open (N.O.) or Normally Closed (N.C.) switch contacts. The SBW validates seat/seat-belt sequencing and has enhanced “seat bounce” error validation. It communicates via J1939 CAN messages to the VDR and displays.
Learn More
- Add to Compare
111655 | SSD Airminder display

Breathing air warning system for aerials, aerial platforms, air trucks and C.F.R. vehicles. Keeps firefighters informed of the percentage of air remaining in a breathing air system from 100% capacity down to zero. A low warning flashes at 25% of maximum air bottle capacity and a 90 dB audible warning sounds at 20% of capacity. The audible alarm can be manually silenced but the visual warning will continue to flash until the air system is filled above the 25% level.
Learn More
- Add to Compare
111663 / 111665 / 111822 | SSD Flowminder display

The Class 1 digital flow meter allows operators to monitor actual flow from a discharge line. The compact design reduces pump panel space requirements while providing large, easy to read digits. Eliminates the need for "rules of thumb" or fire ground hydraulics.
Learn More
- Add to Compare
111653 | SSD Loadminder

The Class1 Aerial Loading Display is designed to warn aerial operators of dangerous loading conditions when an aerial device is operated at low angles of elevation. Live loads (factors that increase this load such as ice, occupants on the ladder, water load, extra equipment, etc.) are instantly taken into account by the system and displayed to the operator.
Learn More
- Add to Compare
117006 | SSD Speedometer

The Officer's Speedometer gives officers the ability to monitor vehicle speed. It features a large easy to read display.
Learn More
- Add to Compare
610-00041 | H-Bridge

The H-Bridge module is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network
Learn More
- Add to Compare
120179 | Climate Control Display

The ES-Key Climate Control Display provides status and control functions for an ES-Key Climate Control system (air conditioning and heat) utilizing a Climate Control Module (p/n 114942).
Learn More
- Add to Compare
115722 | Analog Temperature Sensor

The Analog Temperature Sensor is a compact, waterproof module that converts ambient temperature (-40°F [-40°C] to +257°F [+125°C]) to an analog voltage (+174mV to +1205mV) for use with various Class 1 ES-Key modules.
Learn More
- Add to Compare