Home /
Vehicle Electronics

Vehicle Electronics

Get the most out of your emergency apparatus with firefighting vehicle electronics

Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance. Contact us for more information about our vehicle electronics offering.

610-00033 | Accelerometer-Inclinometer

The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
- Add to Compare
120727 | High Density Power Distribution Module (HDPDM)

The HDPDM is a High Density Power Distribution Module for use in the ES-Key System. It features 21 outputs at up to 13 Amps each and 10 polarity selectable inputs. It is sealed to IP67 and can be mounted anywhere on the apparatus.
Learn More
- Add to Compare
122116 | USM II

The USM II features a full compliment of Utility function and can be configured as a drop in replacement for any USM 1 in the field. It features built in USB connectivity replacing the need for special programming adapters.
Learn More
- Add to Compare
118093 | Seat Belt Warning

The Seat Belt Warning Module (SBW) monitors up to 10 seats and 10 seat belts. Each input is selectable for Normally Open (N.O.) or Normally Closed (N.C.) switch contacts. The SBW validates seat/seat-belt sequencing and has enhanced “seat bounce” error validation. It communicates via J1939 CAN messages to the VDR and displays.
Learn More
- Add to Compare
118551 | Seat Belt Warning Indicator large

This module allows the operator to identify non-belted parties at a glance. It communicates with the SBW module Via the J1939 CAN bus.
Learn More
- Add to Compare
118620 | Seat Belt Warning Indicator small

The Seat Belt Warning display (p/n 118620) is capable of showing the seat status of up to 20 seats with its position indicator and seat belt warning icon.
Learn More
- Add to Compare
119914 | VDR

The Class 1 Vehicle Data Recorder (VDR) system is comprised of a Vehicle Data Recorder and a Seat Belt Warning system.
Learn More
- Add to Compare
103190 | ES-Key Relay Board 12 Output

The ES-Key 12 relay board was designed to be used within the ES-Key multiplex system and contains 8 polarity selectable inputs, 10 positive polarity outputs, and 2 selectable polarity outputs. Each of the 12 outputs utilizes an automotive style relay and a 20A thermal fuse.
Learn More
- Add to Compare
610-00031 | Switch Output Module

The ES-Key16 output module is a Class 1 ES-Key network module designed for use in a ES-Key electrical system network. This module has sixteen (16) configurable polarity outputs (positive or ground). The outputs are controlled from the ES-Key network via J1939 CAN messages and can be tied to desired functionality through the ES-Key database by using the ES-Key professional software.

Learn More
- Add to Compare
610-00041 | H-Bridge

The H-Bridge module is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network
Learn More
- Add to Compare