Vehicle Electronics
Get the most out of your emergency apparatus with firefighting vehicle electronics
Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance.
Contact us for more information about our vehicle electronics offering.
-
The 4 light driver module provides 7.5 amps per output (x4) and mimics the function of the Master Tank Level Display. It is used to power the large tank indicator lights on the side of the apparatus. It is compatible with all Class1 ITL and ITL-40 tank gauges.
Learn More
-
The Total System Manager (TSM) is the most versatile electronic system manager available. This fully programmable device is designed to exceed NFPA requirements.
Learn More
-
The USM II features a full compliment of Utility function and can be configured as a drop in replacement for any USM 1 in the field. It features built in USB connectivity replacing the need for special programming adapters.
Learn More
-
The UltraView™ 780 is a 7 inch full color display. It is visible in direct sunlight and sealed to IP67 making it ideal for both in cab and external applications. It can be fully customized to your application and supports up to 10 different languages. It is designed for rugged high vibration environments making it suitable for a multitude of vehicle applications. it is equipped with three video inputs and has two separate CAN networks.
Learn More
-
The HDPDM is a High Density Power Distribution Module for use in the ES-Key System. It features 21 outputs at up to 13 Amps each and 10 polarity selectable inputs. It is sealed to IP67 and can be mounted anywhere on the apparatus.
Learn More
-
The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
-
The ES-Key 18 digital, 3 output, with 1 analog input module is a Class 1 ES-Key network module designed for use in a ES-KeyTM electrical system network.
Learn More
-
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network. The module has 8 outputs of which 4 of the outputs can be polarity selectable or configured as polarity selectable inputs.
Learn More
-
The ES-Key Climate Control Module (C1 p/n 610-00029) is an ES-Key node that controls a vehicle's air conditioning clutch, heating valve, and fan motor speed with high current digital outputs based upon received J1939 CAN commands from a supported ES-Key control device.
Learn More
-
The ES-Key™ 1Touch® switch panel is a fully customizable switch solution for utilization within a Class 1 ES-Key distributed multiplex network (or peer-to-peer networks). The 1Touch switch allows control and indication of outputs configured within the network database. The 1Touch switch panel is available in four layouts: 4 switches (2 pairs, p/n 1200-04-00-CL1), 8 switches (4 pairs, p/n 1200-08-00-CL1), 12 switches (6 pairs, p/n 1200-12-00-CL1), and 16 switches (8 pairs, p/n 1200-16-00-CL1).
Learn More
