Vehicle Electronics
Get the most out of your emergency apparatus with firefighting vehicle electronics
Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance.
Contact us for more information about our vehicle electronics offering.
-
The Class 1 Vehicle Data Recorder (VDR) system is comprised of a Vehicle Data Recorder and a Seat Belt Warning system.
Learn More
-
The ES-Key 12 relay board was designed to be used within the ES-Key multiplex system and contains 8 polarity selectable inputs, 10 positive polarity outputs, and 2 selectable polarity outputs. Each of the 12 outputs utilizes an automotive style relay and a 20A thermal fuse.
Learn More
-
The Seat Belt Warning display (p/n 118620) is capable of showing the seat status of up to 20 seats with its position indicator and seat belt warning icon.
Learn More
-
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network.
Learn More
-
The ES-Key™ 1Touch® switch panel is a fully customizable switch solution for utilization within a Class 1 ES-Key distributed multiplex network (or peer-to-peer networks). The 1Touch switch allows control and indication of outputs configured within the network database. The 1Touch switch panel is available in four layouts: 4 switches (2 pairs, p/n 1200-04-00-CL1), 8 switches (4 pairs, p/n 1200-08-00-CL1), 12 switches (6 pairs, p/n 1200-12-00-CL1), and 16 switches (8 pairs, p/n 1200-16-00-CL1).
Learn More
-
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network. The module has 8 outputs of which 4 of the outputs can be polarity selectable or configured as polarity selectable inputs.
Learn More
-
The ES-Key 18 digital, 3 output, with 1 analog input module is a Class 1 ES-Key network module designed for use in a ES-KeyTM electrical system network.
Learn More
-
The ES-Key High Density I/O Node (Supernode II p/n 119890) consolidates functions of multiple ES-Key modules to reduce node count and simplify addressing. The Supernode II is well suited for applications where a centralized node location is required.
Learn More
-
The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
-
The HDPDM is a High Density Power Distribution Module for use in the ES-Key System. It features 21 outputs at up to 13 Amps each and 10 polarity selectable inputs. It is sealed to IP67 and can be mounted anywhere on the apparatus.
Learn More
