Vehicle Electronics
Get the most out of your emergency apparatus with firefighting vehicle electronics
Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance. Contact us for more information about our vehicle electronics offering.-
123340-0* | ITL-40
The ITL-40 Tank Level Gauge features a true 180 degree viewing angle with super bright LED's and built-in diagnostic "text" messages for easy troubleshooting. Available in red, yellow, green, blue and multicolored models. the ITL-40 has a programmable low current output for auto fill systems.Learn More -
119395 / 119396 | ITL-4
The Intelli-Tank™ displays feature wide angle viewing and ultra-bright LED’s for high visibility even in direct sunlight. It is very easy to calibrate.Learn More -
111653 | SSD Loadminder
The Class1 Aerial Loading Display is designed to warn aerial operators of dangerous loading conditions when an aerial device is operated at low angles of elevation. Live loads (factors that increase this load such as ice, occupants on the ladder, water load, extra equipment, etc.) are instantly taken into account by the system and displayed to the operator.Learn More -
117006 | SSD Speedometer
The Officer's Speedometer gives officers the ability to monitor vehicle speed. It features a large easy to read display.Learn More -
117155 | TPG
Learn MoreThe Total Pressure Governor (TPG) provides you with tons of features in a compact ergonomically designed package. It is easy to set up and configure. It comes standard with integrated engine instruments (battery voltage, coolant temperature, oil pressure and engine RPM). It utilizes the J1939 CAN bus for engine control but also has an analog throttle output for those engines that do not support CAN control. It has easy to read alpha numeric displays and programmable presets. The integrated alarm output provides a warning whenever anything is out of parameters.
-
118620 | Seat Belt Warning Indicator small
The Seat Belt Warning display (p/n 118620) is capable of showing the seat status of up to 20 seats with its position indicator and seat belt warning icon.Learn More -
610-00035 | PDM-4x12
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network.Learn More -
1200-xx-00-CL1 | 1-Touch
The ES-Key™ 1Touch® switch panel is a fully customizable switch solution for utilization within a Class 1 ES-Key distributed multiplex network (or peer-to-peer networks). The 1Touch switch allows control and indication of outputs configured within the network database. The 1Touch switch panel is available in four layouts: 4 switches (2 pairs, p/n 1200-04-00-CL1), 8 switches (4 pairs, p/n 1200-08-00-CL1), 12 switches (6 pairs, p/n 1200-12-00-CL1), and 16 switches (8 pairs, p/n 1200-16-00-CL1).Learn More -
610-00029 | Climate Control Module
The ES-Key Climate Control Module (C1 p/n 610-00029) is an ES-Key node that controls a vehicle's air conditioning clutch, heating valve, and fan motor speed with high current digital outputs based upon received J1939 CAN commands from a supported ES-Key control device.Learn More -
610-00034 | PDM-8
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network. The module has 8 outputs of which 4 of the outputs can be polarity selectable or configured as polarity selectable inputs.Learn More
