Fire Pumps
Expert-Made Engine-Mounted & Portable Fire Fighting Pumps
Hale fire pumps - driven by diesel engine or electric motor - provide reliable, high-performing service in a variety of firefighting applications.
Explore our pumps below, or contact us for more information about our fire protection equipment.
-
15 | Qtwo
Hale's Qtwo two-stage pump provides unrivaled power and reliability. The Qtwo is based on the Qmax pump, the bestselling single-stage pump in North America. Its strong flow rate knocks down large fires while it high pressure delivery is great for high-rise applications. The Qtwo equipped with an adequate engine can flow over 350 gpm at 600 psi from a 50 psi residual hydrant for excellent high-rise performance.Learn More -
70 | MBP Series Firefighting Water Pump
Hale’s MBP series serves as the first line of defense in firefighting. Our pumps work ideally for supply lines, pre-connects, and booster lines. Add these pumps to your fleet of mini-pumpers, first-out units, and tanker/tenders. The MBP can provide flows up to 1300 GPM (4921 L/min) from tank and pressures up to 350 PSI (24.1 Bar).Learn More -
71 | MG
Hale’s MG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact MG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.Learn More -
77 | RSD
Hale’s RSD pump is the PTO version of the popular DSD. Ideally suited for ARFF and rear mounted applications. With the ability to produce up to 2000 GPM from hydrant with sufficient Horsepower the RSD brings high performance to the rear mount market. Its compact design and the gearbox and volute options allow for maximum truck design flexibilityLearn More -
78 | TBP
Hale’s TBP Twin Booster pump is a unique two-stage series/parallel pump that meets the demands for higher pump performance for structural fires while still retaining the ability to create the high pressures necessary to operate progressive hose lays and the capability of providing low speed pump and roll. The TBP is the first 750 GPM NFPA rated two stage series/parallel PTO driven fire pump in the market. Capable of 150 GPM (568 L/min) at 500 PSI (34.5 Bar) in pressure mode.Learn More -
72 | Qflo Plus
Hale’s Qflo Plus single stage midship pump is lighter than current midship pump designs resulting in lower loads on the chassis. The innovative one-piece body allows easier access to the impeller and mechanical seal, minimizes piping requirements and makes routine maintenance easier. The compact design of the Qflo Plus results in a shorter pump box and increased compartment room for water tanks or personnel.Learn More -
68 | DSD Fire Truck Pump
Our most popular non-manifolded midship pump, the DSD uses the reliable G gearbox. All of Hale’s midship pumps utilizes the G gearbox to deliver superior water flow. The DSD produces up to 2000 GPM from hydrant with sufficient horsepower. The DSD standouts against the competition.Learn More -
65 | 8FK
Hale’s 8FK was designed specifically for high flow industrial firefighting applications. The K gearbox used in the 8FK uses helical gears for strength and for quiet operation. Available with a split shaft, PTO, or drive thru gearbox allows the 8FK to be used in many different applications. The compact design requires less space in your truck freeing up space for water, foam, or equipment.Learn More -
64 | 8FG
Hale’s 8FG was designed specifically for high flow industrial firefighting applications. Built utilizing the popular G gearbox, the 8FG is manufactured for reliable operation. Available with a split shaft, PTO, or drive thru gearbox allows the 8FG to be used in many different applications. The compact design requires less space in your truck freeing up space for water, foam, or equipment.Learn More -
73 | Qmax Single Stage Water Pump
Hale’s Qmax single-stage centrifugal fire pump generates NFPA 1901 rated flows of up to 2250 GPM (8515 LPM). The one-piece body allows easier access to the impeller and mechanical seal. This innovative design minimizes piping requirements and makes routine maintenance easier.Learn More