Need Assistance?

Fire Pumps

Expert-Made Engine-Mounted & Portable Fire Fighting Pumps

 

Hale fire pumps - driven by diesel engine or electric motor - provide reliable, high-performing service in a variety of firefighting applications.

Explore our pumps below, or contact us for more information about our fire protection equipment.

  1. Qmax-XS

    74 | Qmax-XS

    Hale’s Qmax-XS pump’s high water delivery rate to knock down large fires, proven reliability based on the impressive track record of the Qmax pump, and small, innovative design gives your department all that it is looking for in a pump.
    Learn More
  2. APMG

    1000 | APMG

    Hale’s APMG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact APMG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.
    Learn More
  3. Hale Qmax Single-Stage Midship Water Pump

    73 | Qmax Single Stage Water Pump

    Hale’s Qmax single-stage centrifugal fire pump generates NFPA 1901 rated flows of up to 2250 GPM (8515 LPM). The one-piece body allows easier access to the impeller and mechanical seal. This innovative design minimizes piping requirements and makes routine maintenance easier.
    Learn More
  4. 8FG

    64 | 8FG

    Hale’s 8FG was designed specifically for high flow industrial firefighting applications. Built utilizing the popular G gearbox, the 8FG is manufactured for reliable operation. Available with a split shaft, PTO, or drive thru gearbox allows the 8FG to be used in many different applications. The compact design requires less space in your truck freeing up space for water, foam, or equipment.
    Learn More
  5. 8FK

    65 | 8FK

    Hale’s 8FK was designed specifically for high flow industrial firefighting applications. The K gearbox used in the 8FK uses helical gears for strength and for quiet operation. Available with a split shaft, PTO, or drive thru gearbox allows the 8FK to be used in many different applications. The compact design requires less space in your truck freeing up space for water, foam, or equipment.
    Learn More
  6. Hale DSD Fire Truck Pump

    68 | DSD Fire Truck Pump

    Our most popular non-manifolded midship pump, the DSD uses the reliable G gearbox. All of Hale’s midship pumps utilizes the G gearbox to deliver superior water flow. The DSD produces up to 2000 GPM from hydrant with sufficient horsepower. The DSD standouts against the competition.
    Learn More
  7. LKA/XKA

    69 | LKA/XKA

    Hale’s LKA/XKA split shaft PTO gearbox is a practical, cost-effective alternative to using dedicated engines to power pumps, generators, air compressors, and other auxiliary equipment. It is also the heavy-duty alternative to general purpose power takeoffs that are not built for high speed and high torque characteristics of fire truck and emergency vehicle applications. Installed in a midship position between the two halves of a split driveshaft, the LKA/XKA uses a sliding gear to shift power between the vehicle’s wheels and its own output shaft.
    Learn More
  8. MG

    71 | MG

    Hale’s MG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact MG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.
    Learn More
  9. RME

    76 | RME

    Hale’s RME pump is designed specifically for rear mount applications. Designed utilizing a mounting pedestal for ease of installation. The RME pump is a direct drive pump capable of flows in excess of 3000GPM (11,356 L/min).
    Learn More
  10. RSD

    77 | RSD

    Hale’s RSD pump is the PTO version of the popular DSD. Ideally suited for ARFF and rear mounted applications. With the ability to produce up to 2000 GPM from hydrant with sufficient Horsepower the RSD brings high performance to the rear mount market. Its compact design and the gearbox and volute options allow for maximum truck design flexibility
    Learn More

Back to top