Parts & Accessories
-
34AD | Automatic Drain
The Automatic Drain is normally open and closes at 6 PSI. It can be mounted in the discharge line true low spot under the truck. Great for deck guns and front or rear jump lines.Learn More -
-
-
105120 | Petcock Valve
Class1’s Petcock Valve is an all brass assembly with a tag recess area in the chrome plated zinc handle. The petcock valve has 1/4” ports and is great for engine coolers, pump coolers and air valves.Learn More -
125 | Valve Flanges
Hale's Valve Flanges are made of stainless steel. They are available for 2”, 2-1/2”, 3” and 4” valves. Including suction, discharge, weld and grooved coupling end.Learn More -
126 | Weld & Grooved Coupling Fittings
Hale's fittings are made of stainless steel. They are available with grooved coupling, weld and valve adapting ends.Learn More -
127 | DOT Push-On Fittings
Class1’s DOT Push-On Fittings are available in a variety of sizes from 1/4” to 3/4” and a variety of configurations, including 45° and 90° elbow, swivel and non-swivel, straight, tee and bulkhead.Learn More -
128 | Caps, Plugs, and Adapters
Hale caps and fittings are specially designed for firefighting apparatus by Class1 in styles that are priced for your needsLearn More -
ESP | ESP (Environmentally Safe Priming) System
Hale’s ESP priming system provides the ultimate in fast priming, high vacuum performance and reliability without the use of a lubricant. Technologically advanced and environmentally safe, the Model ESP is self lubricating. There is no oil tank to check and refill, no oil is expelled to the ground. The ESP is a semiautomatic priming system with a single action control valve which simultaneously activates the entire system ensuring fast consistent air evacuation. Hale’s electric rotary vane-type positive displacement primer is available with 12-volt or 24-volt DC power.
-
100294 | Push-Pull T-Handle
Class1's Push-Pull T-Handle is for valve actuation control.Learn More