Parts & Accessories
-
124 | Stainless Steel Swivels
Stainless steel swivels are available in several different configurations to best fit your application. The assemblies are centered around the polished 90o elbow, which is available in both 1.5” NH (short and long) and 2.5” NH threads. The 1.5” NH assemblies have 2.0” piping with a grooved coupling connection. The 2.5” NH assemblies have 2.5” piping with a grooved coupling connection. The assemblies can be ordered with or without the bumper flangeLearn More -
125 | Valve Flanges
Hale's Valve Flanges are made of stainless steel. They are available for 2”, 2-1/2”, 3” and 4” valves. Including suction, discharge, weld and grooved coupling end.Learn More -
126 | Weld & Grooved Coupling Fittings
Hale's fittings are made of stainless steel. They are available with grooved coupling, weld and valve adapting ends.Learn More -
100294 | Push-Pull T-Handle
Class1's Push-Pull T-Handle is for valve actuation control.Learn More -
TRV | Thermal Relief Valve (TRV)
Hale’s Thermal Relief Valve automatically protects your pump from the overheating that may be caused by “deadheading”. Minimizing the need for operator attention to overheating during pumping operations, the TRV 120 automatically dumps a controlled amount of water to atmosphere or back to tank when the pump water temperature exceeds the preset value (120oF/49oC) of the relief valve, and then automatically closes when the water cools. When ordered as a TRV-L 120 with indicator light option, a visual warning lamp is lit when the TRV valve is open. The TRV-L 120 combines the functions of water bypass with an operator warning systemLearn More -
102709 | Gauge Test Plug (Single)
Gauge Test Plug is nickel plated brass with a 1/4” NPT front port and 1/8” NPT back port.Learn More -
121384 | Test Port Assembly
Ease of installation and simplicity of design makes this test port assembly the best option for multiple tasks behind the panel. Each port has one front 1/4” NPT port, one back 1/4” NPT port, and two 1/4” DOT push-on fittings. The ports behind the panel are perfect for mounting pressure transducers for pressure governors. This assembly is made of brass with a chrome plated bezel.Learn More -
34AD | Automatic Drain
The Automatic Drain is normally open and closes at 6 PSI. It can be mounted in the discharge line true low spot under the truck. Great for deck guns and front or rear jump lines.Learn More -
-
Shop By
Currently Shopping by
-
Type:
Plumbing
Discharge
Relief Valve
Top Mount
Shopping Options
- Type
- Elbows (3)
- Pump Panel (2)
- Gauges (3)
- Plumbing (20)
- Accessories (26)
- Adapters (4)
- Controls (1)
- Connectors (1)
- Drain Valves (8)
- Brackets (1)
- Portable Accessories (1)
- Speed Lays (1)
- Drains (9)
- Plumbing Controls (3)
- Intake (4)
- Discharge (4)
- TRV (1)
- Primer (1)
- Relief Valve (1)
- Skids & Trailers (1)
- Side Mount (1)
- Top Mount (1)
- Sidekick (1)
- Safe Buy (1)
- Valves (13)
- Manifold Kits (1)
- Pump Module (1)
- Manufacturer
Compare Products
You have no items to compare.
