Vehicle Electronics
Get the most out of your emergency apparatus with firefighting vehicle electronics
Your emergency vehicles are integral to the efficiency and safety of your firefighting team. Hale provides vehicle electronics that are designed to help you simplify emergency scene operations and give you more insight for preventive maintenance.
Contact us for more information about our vehicle electronics offering.
-
The Dual Analog to CAN with Accelerometer is designed to monitor two analog inputs and transmit the information on the CAN bus.The module also is an accelerometer that can be used as a inclinometer or impact sensor that reads g-forces in 2 axis and transmit the information to the ES-Key network.
Learn More
-
The Officer's Speedometer gives officers the ability to monitor vehicle speed. It features a large easy to read display.
Learn More
-
The Remote Dash Indicator receives a signal directly from Master Tank Level Display. It fits in an industry standard rocker switch cut out saving valuable cab space.
Learn More
-
The H-Bridge module is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network
Learn More
-
The HDPDM is a High Density Power Distribution Module for use in the ES-Key System. It features 21 outputs at up to 13 Amps each and 10 polarity selectable inputs. It is sealed to IP67 and can be mounted anywhere on the apparatus.
Learn More
-
The USM II features a full compliment of Utility function and can be configured as a drop in replacement for any USM 1 in the field. It features built in USB connectivity replacing the need for special programming adapters.
Learn More
-
Class1‘s ENFO III provides the pump operator with electrical system and engine operating information in a single unit that includes an alarm. It utilizes the Engines J1587 data link for communication.
Learn More
-
The High Current PDM (p/n 610-00046) is a Class 1 ES-KeyTM module with 8 high current positive outputs, 4 selectable polarity inputs designed for use within an ES-Key electrical system network, and 4 “MFI” (Multi-Function Inputs).
Learn More
-
The Analog Temperature Sensor is a compact, waterproof module that converts ambient temperature (-40°F [-40°C] to +257°F [+125°C]) to an analog voltage (+174mV to +1205mV) for use with various Class 1 ES-Key modules.
Learn More
-
The ENFO IV is an engine monitoring device that reads and displays: engine RPM, engine coolant temperature, and engine oil pressure via SAE J1939 CAN messages from the engine Electronic Control Unit (ECU). It also displays vehicle voltage but this is independent of SAE J1939 CAN operation.
Learn More
