Need Assistance?

Pumps

Expert-made fire pumps for your firefighting application

Fire pumps make up the core of your fire truck you need it to perform in toughest conditions. With over 100 years of experience in fire pump manufacturing, you can trust Hale to provide you reliable and high-performing pumps for any firefighting team. Explore our fire pumps below, or contact us for more information about our firefighting equipment offerings.

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  1. RSD

    77 | RSD

    Hale’s RSD pump is the PTO version of the popular DSD. Ideally suited for ARFF and rear mounted applications. With the ability to produce up to 2000 GPM from hydrant with sufficient Horsepower the RSD brings high performance to the rear mount market. Its compact design and the gearbox and volute options allow for maximum truck design flexibility
    Learn More
  2. RME

    76 | RME

    Hale’s RME pump is designed specifically for rear mount applications. Designed utilizing a mounting pedestal for ease of installation. The RME pump is a direct drive pump capable of flows in excess of 3000GPM (11,356 L/min).
    Learn More
  3. RGA/LGA/MGA

    75 | RGA/LGA/MGA

    Hale’s RGA/LGA/MGA split shaft PTO gearbox is a practical, cost-effective alternative to using dedicated engines to power pumps, generators, air compressors, and other auxiliary equipment. It is also the heavy-duty alternative to general purpose power takeoffs that are not built for high speed and high torque characteristics of fire truck and emergency vehicle applications. Installed in a midship position between the two halves of a split driveshaft, the RGA/LGA/MGA uses a sliding gear to shift power between the vehicle’s wheels and its own output shaft.
    Learn More
  4. MG

    71 | MG

    Hale’s MG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact MG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.
    Learn More
  5. MBP Series Firefighting Water Pump

    70 | MBP Series Firefighting Water Pump

    Hale’s MBP series serves as the first line of defense in firefighting. Our pumps work ideally for supply lines, pre-connects, and booster lines. Add these pumps to your fleet of mini-pumpers, first-out units, and tanker/tenders. The MBP can provide flows up to 1300 GPM (4921 L/min) from tank and pressures up to 350 PSI (24.1 Bar).
    Learn More

Page:
  1. 3
  2. 4
  3. 5
  4. 6

Back to top