Need Assistance?

Fire Pumps

Expert-Made Engine-Mounted & Portable Fire Fighting Pumps

 

Hale fire pumps - driven by diesel engine or electric motor - provide reliable, high-performing service in a variety of firefighting applications.

Explore our pumps below, or contact us for more information about our fire protection equipment.

Page:
  1. 1
  2. 2
  3. 3
  1. TBP

    78 | TBP

    Hale’s TBP Twin Booster pump is a unique two-stage series/parallel pump that meets the demands for higher pump performance for structural fires while still retaining the ability to create the high pressures necessary to operate progressive hose lays and the capability of providing low speed pump and roll. The TBP is the first 750 GPM NFPA rated two stage series/parallel PTO driven fire pump in the market. Capable of 150 GPM (568 L/min) at 500 PSI (34.5 Bar) in pressure mode.
    Learn More
  2. 2CBP

    63 | 2CBP

    Hale’s 2CBP two-stage centrifugal high pressure booster pump is high on performance but low on both power and maintenance requirements. It is driven by the truck transmission power takeoff (PTO). This lightweight pump serves well in an initial attack vehicle. Versatile and cost effective, the 2CBP can provide up to 1,000 PSI (69 BAR) of pressure and volumes up to 100 GPM (380 L/min).
    Learn More
  3. AP

    66 | AP

    Hale’s AP series serves as the first line of defense in firefighting ideally suited for supply lines, pre-connects, and booster lines in mini-pumpers, first-out units, and tanker/tenders. The AP can provide flows up to 700 GPM (2650 L/min) from tank and pressures up to 350 PSI (24.1 Bar).
    Learn More
  4. Hale CBP Compact PTO Water Pump

    67 | CBP Compact PTO Water Pump

    Our most compact PTO pump, the CBP water pump is ideally suited for initial attack, booster, and transfer auxiliary pump duty. The space saving, innovative design allows for maximum space for water tank and components. The compact PTO CBP water pump puts heavy duty performance in a lightweight package. Get flows of up to 400 GPM (1500 L/min) and pressures up to 400 psi (27 BAR).
    Learn More
  5. LKA/XKA

    69 | LKA/XKA

    Hale’s LKA/XKA split shaft PTO gearbox is a practical, cost-effective alternative to using dedicated engines to power pumps, generators, air compressors, and other auxiliary equipment. It is also the heavy-duty alternative to general purpose power takeoffs that are not built for high speed and high torque characteristics of fire truck and emergency vehicle applications. Installed in a midship position between the two halves of a split driveshaft, the LKA/XKA uses a sliding gear to shift power between the vehicle’s wheels and its own output shaft.
    Learn More
  6. MBP Series Firefighting Water Pump

    70 | MBP Series Firefighting Water Pump

    Hale’s MBP series serves as the first line of defense in firefighting. Our pumps work ideally for supply lines, pre-connects, and booster lines. Add these pumps to your fleet of mini-pumpers, first-out units, and tanker/tenders. The MBP can provide flows up to 1300 GPM (4921 L/min) from tank and pressures up to 350 PSI (24.1 Bar).
    Learn More
  7. MG

    71 | MG

    Hale’s MG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact MG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.
    Learn More
  8. RGA/LGA/MGA

    75 | RGA/LGA/MGA

    Hale’s RGA/LGA/MGA split shaft PTO gearbox is a practical, cost-effective alternative to using dedicated engines to power pumps, generators, air compressors, and other auxiliary equipment. It is also the heavy-duty alternative to general purpose power takeoffs that are not built for high speed and high torque characteristics of fire truck and emergency vehicle applications. Installed in a midship position between the two halves of a split driveshaft, the RGA/LGA/MGA uses a sliding gear to shift power between the vehicle’s wheels and its own output shaft.
    Learn More
  9. RME

    76 | RME

    Hale’s RME pump is designed specifically for rear mount applications. Designed utilizing a mounting pedestal for ease of installation. The RME pump is a direct drive pump capable of flows in excess of 3000GPM (11,356 L/min).
    Learn More
  10. RSD

    77 | RSD

    Hale’s RSD pump is the PTO version of the popular DSD. Ideally suited for ARFF and rear mounted applications. With the ability to produce up to 2000 GPM from hydrant with sufficient Horsepower the RSD brings high performance to the rear mount market. Its compact design and the gearbox and volute options allow for maximum truck design flexibility
    Learn More

Page:
  1. 1
  2. 2
  3. 3

Back to top