Need Assistance?

Fire Pumps

Expert-Made Engine-Mounted & Portable Fire Fighting Pumps

 

Hale fire pumps - driven by diesel engine or electric motor - provide reliable, high-performing service in a variety of firefighting applications.

Explore our pumps below, or contact us for more information about our fire protection equipment.

Page:
  1. 1
  2. 2
  1. TBP

    78 | TBP

    Hale’s TBP Twin Booster pump is a unique two-stage series/parallel pump that meets the demands for higher pump performance for structural fires while still retaining the ability to create the high pressures necessary to operate progressive hose lays and the capability of providing low speed pump and roll. The TBP is the first 750 GPM NFPA rated two stage series/parallel PTO driven fire pump in the market. Capable of 150 GPM (568 L/min) at 500 PSI (34.5 Bar) in pressure mode.
    Learn More
  2. MBP Series Firefighting Water Pump

    70 | MBP Series Firefighting Water Pump

    Hale’s MBP series serves as the first line of defense in firefighting. Our pumps work ideally for supply lines, pre-connects, and booster lines. Add these pumps to your fleet of mini-pumpers, first-out units, and tanker/tenders. The MBP can provide flows up to 1300 GPM (4921 L/min) from tank and pressures up to 350 PSI (24.1 Bar).
    Learn More
  3. MG

    71 | MG

    Hale’s MG pump is our most compact midship pump. Designed to fill the gap between a standard attack pump and a full-range midship pump the Lightweight and compact MG pump is built to fit the chassis of most commercially built fire trucks and tankers, “mini,” “midi,” or attack pumpers, field or brush trucks, and mid or full-size tankers.
    Learn More
  4. RME

    76 | RME

    Hale’s RME pump is designed specifically for rear mount applications. Designed utilizing a mounting pedestal for ease of installation. The RME pump is a direct drive pump capable of flows in excess of 3000GPM (11,356 L/min).
    Learn More
  5. RSD

    77 | RSD

    Hale’s RSD pump is the PTO version of the popular DSD. Ideally suited for ARFF and rear mounted applications. With the ability to produce up to 2000 GPM from hydrant with sufficient Horsepower the RSD brings high performance to the rear mount market. Its compact design and the gearbox and volute options allow for maximum truck design flexibility
    Learn More
  6. Qtwo

    15 | Qtwo

    Hale's Qtwo two-stage pump provides unrivaled power and reliability. The Qtwo is based on the Qmax pump, the bestselling single-stage pump in North America. Its strong flow rate knocks down large fires while it high pressure delivery is great for high-rise applications. The Qtwo equipped with an adequate engine can flow over 350 gpm at 600 psi from a 50 psi residual hydrant for excellent high-rise performance.
    Learn More
  7. Qflo Plus

    72 | Qflo Plus

    Hale’s Qflo Plus single stage midship pump is lighter than current midship pump designs resulting in lower loads on the chassis. The innovative one-piece body allows easier access to the impeller and mechanical seal, minimizes piping requirements and makes routine maintenance easier. The compact design of the Qflo Plus results in a shorter pump box and increased compartment room for water tanks or personnel.
    Learn More
  8. Hale DSD Fire Truck Pump

    68 | DSD Fire Truck Pump

    Our most popular non-manifolded midship pump, the DSD uses the reliable G gearbox. All of Hale’s midship pumps utilizes the G gearbox to deliver superior water flow. The DSD produces up to 2000 GPM from hydrant with sufficient horsepower. The DSD standouts against the competition.
    Learn More
  9. 8FK

    65 | 8FK

    Hale’s 8FK was designed specifically for high flow industrial firefighting applications. The K gearbox used in the 8FK uses helical gears for strength and for quiet operation. Available with a split shaft, PTO, or drive thru gearbox allows the 8FK to be used in many different applications. The compact design requires less space in your truck freeing up space for water, foam, or equipment.
    Learn More
  10. 8FG

    64 | 8FG

    Hale’s 8FG was designed specifically for high flow industrial firefighting applications. Built utilizing the popular G gearbox, the 8FG is manufactured for reliable operation. Available with a split shaft, PTO, or drive thru gearbox allows the 8FG to be used in many different applications. The compact design requires less space in your truck freeing up space for water, foam, or equipment.
    Learn More

Page:
  1. 1
  2. 2

Back to top