Need Assistance?

Parts & Accessories

Page:
  1. 1
  2. 2
  3. 3
  1. MIV 2.0

    MIV | MIV 2.0

    Hale’s MIV is the ultimate behind-the-panel large diameter NFPA compliant intake valve because only the MIV offers full flow performance, bronze construction, plumbing for intake valves and provisions for pre-priming.

    Learn More
  2. Thermal Relief Valve (TRV)

    TRV | Thermal Relief Valve (TRV)

    Hale’s Thermal Relief Valve automatically protects your pump from the overheating that may be caused by “deadheading”. Minimizing the need for operator attention to overheating during pumping operations, the TRV 120 automatically dumps a controlled amount of water to atmosphere or back to tank when the pump water temperature exceeds the preset value (120oF/49oC) of the relief valve, and then automatically closes when the water cools. When ordered as a TRV-L 120 with indicator light option, a visual warning lamp is lit when the TRV valve is open. The TRV-L 120 combines the functions of water bypass with an operator warning system
    Learn More
  3. Shift Interlock Module

    141 | Shift Interlock Module

    The shift interlock module integrates innovative Class 1 electronics to Hale’s reliable G gearbox. The module exceeds the latest NFPA requirements for NFPA 16.10.1.4 by reducing shifting errors when the apparatus transmission is not safely placed into neutral. Whether shifting into road or pump, the interlock module simplifies the integration of shifting into electronic or multiplexed systems. The electronic shift interlock module simplifies installation, increases fire fighter safety by preventing run away truck conditions, and prevents costly equipment damage caused by hot shifts.
    Learn More
  4. QC Test Gauge Kits

    106 | QC Test Gauge Kits

    Class1's QC test gauge kits are an easy way to check your panel gauges. This kit comes complete with everything needed to easily perform the test right in the station or during your annual pump test.
    Learn More
  5. Locking Top Mount Controls

    107 | Locking Top Mount Controls

    Class1 Locking Top Mount Controls allows for a more compact and cleaner pump panel while reducing installation time and material cost.
    Learn More
  6. Locking Push-Pull Controls

    Valve Control | Locking Push-Pull Controls

    Class1 Locking Push-Pull Controls handles valve actuation.
    Learn More
  7. Valve Handles

    Swift | Valve Handles

    The Class1 Swift Valve™ Handles offer a great alternative to the traditional swing handles.
    Learn More
  8. Control Rod Assemblies

    110 | Control Rod Assemblies

    Class1 Control Rod Assemblies are made with galvanized pipe with ½-20 threaded inserts. Rods are available in ½” increments started at 6” up to 66”.
    Learn More
  9. Push-Pull T-Handle

    100294 | Push-Pull T-Handle

    Class1's Push-Pull T-Handle is for valve actuation control.
    Learn More
  10. 12 Port Manual Master Drain

    121368 | 12 Port Manual Master Drain

    Class1 Manual Master Drain has 12 individually sealed ports that allow quick draining of multiple intake and discharge lines. The all brass and stainless steel construction allows for operation up to 600 psi.
    Learn More

Page:
  1. 1
  2. 2
  3. 3

Back to top