Need Assistance?

Engine Driven Units

High-volume water pumps powered by engines

Engine-driven fire pumps operate use gasoline or diesel to control a high-powered engine to help you move a lot of water. These portable pumps are great for a variety of applications, including wildland firefighting, low-pressure firefighting, water transfer or de-watering. Hale engine-driven fire pumps are available for large and small jobs, from trailer mounted pumps to lightweight portable pump options that can be deployed in water or transported on your back.

To learn more about Hale engine-driven fire pumps, browse our selection below, or contact a local service provider.

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. Fyr Flote - Pressure

    545-2131-00-0 | Fyr Flote - Pressure

    The Fyr Flote is a lightweight, portable centrifugal pump mounted on an unsinkable, high-strength polyethylene float with dual carrying handles and a splash suppression collar. A high-volume model (20FV-C8) and a high-pressure model (20FP-C8) meet most every pump need — in as little as four inches of water. Weighing just 49 pounds, the Fyr Flote stores easily in most truck compartments. It includes an automatic recoil starter, a spark arresting muffler, and an engine overspeed control switch.
    Learn More
  2. PowerFlow HPX450-B35

    545-5220-00-0 | PowerFlow HPX450-B35

    When you need to move a lot of water, you need a high quality pump that is engineered to perform. Hale’s range of high flow pumps give you the capacity you need. Whether your application is for low pressure firefighting, water transfer or de-watering, there is a Hale high flow pump for you. Hale has a long heritage of designing and manufacturing high performance fire pumps, so you can trust Hale to deliver the performance you demand.
    Learn More
  3. Fyr Pak

    545-2141-00-0 | Fyr Pak

    The Fyr Pak is a lightweight portable centrifugal pump mounted on a padded adjustable backpack frame. Weighing only 34 pounds, the Fyr Pak can pump water from draft, relay, or hydrant. It can go where a fire engine can't reach. It will deliver discharge pressures up to 220 PSI and flows to 75 GPM from draft. The Fyr Pak includes an automatic recoil starter, a spark arresting muffler, an engine overspeed control switch, a priming pump, and a priming valve.
    Learn More
  4. Super Chief

    545-4091-07-0 | Super Chief

    Hale’s Super Chief has a unique design specially engineered for the fire service. The pump and engine assembly detach easily from the float. The float folds in half for convenient storage in most apparatus compartments.

    The Super Chief is the pump to count on when you cannot count on hydrants. It is easily used with alternative water sources such as streams, lakes, ponds, or pools. The Super Chief requires only three inches of water to draft.

    Learn More
  5. PowerFlow HPT300-B18

    545-4072-20-0 | PowerFlow HPT300-B18

    When you need to move a lot of water, you need a high quality pump that is engineered to perform. Hale’s range of high flow pumps give you the capacity you need. Whether your application is for low pressure firefighting, water transfer or de-watering, there is a Hale high flow pump for you. Hale has a long heritage of designing and manufacturing high performance fire pumps, so you can trust Hale to deliver the performance you demand.
    Learn More

Page:
  1. 1
  2. 2
  3. 3
  4. 4

Back to top