SMP1250DI-O	SPM225DP-O	FPM3000DI

Diesel powered pumping units complete and tested 500 through 3000 GPM.

NFPA 1901, 1925, and industrial rated models

Most models available with Class 1 electronic pump pressure controls to eliminate relief valve, reduce fuel consumption, wear and noise.

Standard marine pump models are available with IVECO motors or Lister Petter engines.

Standard Equipment:

• Hale high performance bronze or stainless steel single suction pump end
• Marine diesel engine - liquid cooled
• EPS marine emissions compliant
• Local start panel on engine with pump pressure gauge
• Pump/engine mounted on a low profile painted structural steel base
• Elastomeric drive coupling standard
• Closed loop cooling system for fresh or salt water
• Raw water pump mounted to engine
• Wet exhaust for marine use
• Cable throttle standard
• Flange or Victaulic groove suction connection; flange discharge connection
• Pump and steel frame painted
• Hourmeter Thermal Relief Valve
• SAE J1929 Engine Data Port (not available on some engines)

Options for a Custom Package

• Class 1 ENFO Engine Data Display (May not be available on some engines)
• Class 1 3.5 inch Pump Discharge Pressure Gauge
• Class 1 Pump Pressure Governor
• Paper Manual Notebook IPO CD
• Class 1 Electronic Vernier Throttle (May not be available on some engines)
• Stainless steel suction and discharge weld flange set
• TRV-L Thermal Relief Valve with Panel Indiator IPO Std
• Certificate of Performance to NFPA 1901
• Stainless steel base frame (IPO Std)
• Dry vertical exhaust outlet
• Anodes